Projects

Bokor DDNI

BOKOR CPP PHASE 3 PROJECT (2020)

Bokor is a shallow-water oil field located in 67m-deep waters in the Baram Delta offshore, Sarawak, Malaysia. It is jointly owned by Petronas Carigali and Sarawak Shell Berhad, with Petronas Carigali as the operator.

DD & I ENGINEERING SDN BHD received a contract for engineering, procurement, construction, installation and commissioning for BOKOR project with MHB.

malikai ddni

Malikai Deepwater Oilfield Project (2016)

Malikai oilfield is located approximately 100km off the coast of Sabah, Malaysia, in water depths of up to 500m within Block G of the South China Sea. It is Malaysia’s third deepwater project after the Kikeh and Gumusut Kakap projects. Shell (the operator) and ConocoPhillips hold 35% interest each in the development, while Petronas Carigali owns the remaining 30% interest. Production from the project was achieved in December 2016.

DD & I ENGINEERING SDN BHD involved with Malikai oilfield development with Malaysia Marine and Heavy Engineering Holdings Berhad (MHB)

BESAR-A-DDNI-project

BESAR A PROJECT (2016)

MHB was also awarded the PCC Besar A topside and jacket project in September 2014 by Petronas.

DD & I ENGINEERING SDN BHD involved with BESAR A project with Malaysia Marine and Heavy Engineering Holdings Berhad (MHB)​​

gumusut kakap 2012 ddni

Gumusut-Kakap Deepwater Oil and Gas Project (2012)

The Gumusut-Kakap project includes the joint development of two ultra-deep water discoveries, Gumusut and Kakap. The fields are located within blocks J and K, about 120km offshore from Sabah, Malaysia. Water depth is in the region is 1,200m (3,937ft).

DD & I ENGINEERING SDN BHD received a contract for engineering, procurement, construction, installation and commissioning for GUMUSUT-KAKAP project.

tapis-project-oil-ddni

Tapis Enhanced Oil Recovery (EOR) Project (2014)

Tapis R is one of the largest offshore platform in Southeast Asia and is a key component of the Tapis Enhanced Oil Recovery (EOR) project. Fully designed and constructed in Malaysia, the Tapis R topsides deck was fabricated by Malaysia Marine & Heavy Engineering based on a RM1.4 billion contract awarded by ExxonMobil in November 2011.

DD & I ENGINEERING SDN BHD involved with Tapis R project with Malaysia Marine and Heavy Engineering Holdings Berhad (MHB)​

RUBY-DDNI-blasting-painting

FPSO Ruby II (2010)

FPSO Ruby II is based on total repair, life extension and conversion of the 1990 built Aframax tanker MT Cherry II. The FPSO features a bow mounted turret with nine (9) mooring lines and slots for a total of five (5) production risers and three (3) gaslift risers.

DD & I ENGINEERING SDN BHD involved with FPSO Ruby II project with Malaysia Marine and Heavy Engineering Holdings Berhad (MHB)​ Engineering, procurement and construction of the topsides as well as the fabrication and installation of the turret.

Need Help With Easier Industrial Solutions? We Are Experts!

Scroll to Top